350L Waste Oil Tank with Bund 870Dia x 1010H $1,380.00 Quantity Diesel/OilTanksProduct tabsDescriptionRenowned for their strength and quality. Fabricated in High Gloss Polyethylene so it is easy to wipe down and keep clean. The Tank is double skinned as required by the Environmental Protection Authority Regulations HSNOCOP 63. The Tank must be stored inside. Each Tanks has 2 x 50 mm BSP ports to allow the installation of Level Indicators and Pipe Stands. Each Tank is individually numbered and has Regulation signage permanently moulded into the polyethylene. Moulded Tie Down Points are included to allow the tank to be transported. Each Tank comes with a User Manual and Certification Documents which are inserted into your HSE Manual. Kiwi Tanks COTENE™ XC1501 is a linear medium density polyethylene specifically designed for use in rotationally Moulded Waste Oil Tanks This grade has good impact, mechanical and stress crack resistance properties. COTENE™ XC1501 has been tested and passed the mechanical and chemical resistance requirements of international regulations ECE R34.01 Annex 5 Section 5.0 "Resistance to Fire" and European Directive 2000/8/EC, with a fuel permeation rate of 5g/day. A statement of compliance is available on request. COTENE™ XC1501 contains a fully formulated UV Stabilization package (with a minimum UV8 rating). NOTE: Individual designs and moulding parameters will have to be tested independently to conform to the remaining requirements of the ECE regulation. We believe in our products and have a no nonsense warranty when installed correctly. Delivery of tanks can be arranged throughout New Zealand Technical specifications Diameter 870mm Height 1010mm Usage: Diesel/Oil